This summary of the video was created by an AI. It might contain some inaccuracies.
00:00:00 – 00:23:09
In this video, the creator tackles the challenge of repairing eight broken Xbox Series X controllers purchased from eBay, addressing various issues such as broken thumbsticks, sticky buttons, stick drift, and general internal damage. Key techniques discussed include disassembling controllers, cleaning with isopropyl alcohol, and using tools like a Hakko 808 desoldering gun for repairs. The presenter successfully replaces damaged analog sticks and potentiometers, with particular attention to ensuring the thumbsticks function correctly post-repair. The narrative proceeds through detailed cleaning and reassembly processes, confirming the efficacy of repairs using gamepad testers and consoles. The video concludes with a note on the successful repair of multiple controllers and a hint at future content focused on PS5 controllers, along with a sponsor message from Morningbrew.
00:00:00
In this segment of the video, the creator unboxes eight broken Xbox Series X controllers bought from eBay to attempt to fix them. The issues identified include broken thumbsticks, sticky buttons, and stick drift. Specific observations are:
– Controller #1: No visible issues; will test with an Xbox Series X.
– Controller #2: Broken thumbstick; further testing of other buttons needed.
– Controller #3: Multiple sticky buttons and triggers, likely due to a spill; will require cleaning.
– Controller #5: Broken thumbstick; no other issues observed.
– Controllers #6 and #7: No visible issues; will test with a console.
– Controller #8: Verifiable right stick drift; no other problems noted.
Before proceeding to repair, the creator mentions the video sponsor, Morningbrew.
00:03:00
In this part of the video, the speaker transitions back to fixing Xbox Series X controllers after discussing the Morning Brew newsletter. The specific controller in focus has a broken right stick with a piece rattling inside. The speaker identifies and removes the broken parts of the thumbstick cap, examines the analog stick for permanent damage, and notes that the analog stick movement is normal when not obstructed. However, they notice an issue where the stick gets stuck and grinds when moved downward, suggesting possible internal damage or an obstructed component.
00:06:00
In this part of the video, the person describes the process of repairing an analog stick that was damaged. They initially hoped to avoid replacing it but decided otherwise due to its condition. They use a Hakko 808 desoldering gun, which has a vacuum pump and a heated tip, to remove solder from the mounting pins of the analog stick. After desoldering, they dismantle the analog stick to determine the cause of the problem. They discover that the analog stick was cracked and broken, which justified the need for a complete replacement. Following the inspection, a new analog stick will be installed and tested. The video also emphasizes the importance of handling thumb sticks carefully to avoid damage.
00:09:00
In this segment of the video, the creator discusses repairing a series of controllers. They successfully fix the analog stick on the first controller, confirming it works fine after reassembly. Moving on to the second controller with sticky buttons, they express concerns about its internal condition. Upon opening it, they find it exceedingly sticky but not as bad as anticipated. The creator proceeds to disassemble it further to clean the gunk and sticky residue from the button pad and board.
00:12:00
In this part of the video, the presenter addresses the issue of a sticky controller, noting how the buttons and the board have become problematic due to the stickiness. The segment involves a detailed cleaning process of the controller, which the presenter describes as nearly a full rebuild. The tools used for the cleaning include q-tips and isopropyl alcohol, with the alcohol helping to soften and remove the sticky residue more effectively. The presenter initiates a cleaning montage and, after an hour and numerous q-tips, successfully cleans the controller. The segment concludes with reassembling and testing the controller to ensure it works properly.
00:15:00
In this segment of the video, the content creator tests the newly repaired buttons using a gamepad tester, confirming that they now function correctly. They move on to fixing the fifth gamepad, focusing on a broken right thumbstick. After disassembling it, they identify the same issue as in a previous repair: a broken piece inside the thumbstick. However, the analog stick itself appears intact and functional, meaning only the thumbstick needs replacement. The creator then addresses the eighth gamepad, which has a drifting right stick. After opening it up, they plan to clean it using an electronic contact cleaner. If cleaning doesn’t resolve the issue, they will proceed to repair the analog stick.
00:18:00
In this part of the video, the creator attempts to fix an analog stick drift issue by cleaning but finds it ineffective. They decide to replace the potentiometer, focusing on the one responsible for the up and down axis. After marking the component and desoldering joints, they discover the contacts are worn out. They opt to reuse a potentiometer from another analog stick, successfully replacing and soldering it. Testing confirms the thumbstick works perfectly. Additionally, upon testing other controllers with a console, they identify a faulty A button on controller number one and begin inspecting it.
00:21:00
In this segment, the speaker addresses an issue with a button pad on a board. After verifying there’s no apparent problem with the button pad, they jump the pads on the board using a metal pick to see if it registers on the screen, which it does. This indicates the issue might be due to some residue on the contacts. The speaker then cleans the contacts with isopropyl alcohol, tests it again, and confirms the button pad works properly. After reassembling the device and testing all buttons, they confirm the issue is resolved. The video concludes with the speaker mentioning their success in fixing multiple Xbox Series X controllers and hinting at another video where they fix PS5 controllers. Additionally, there is a promotion for the video’s sponsor, Morningbrew.