This summary of the video was created by an AI. It might contain some inaccuracies.
00:00:00 – 00:10:27
The YouTube video provides a step-by-step tutorial on replacing the battery of a Google Pixel 3 phone. The presenter uses tools like a Screwdriver Set, Suction cup, and Plastic pry tools to carefully disassemble and reassemble the phone. Steps include removing the battery with caution, cutting black pull tabs, and applying new adhesive tape. Recommendations include using double-sided adhesive tape and isopropyl alcohol for cleaning. The video ends with a note on using B7000 glue if needed to reattach the back cover to the phone frame for completion of the repair process.
00:00:00
In this segment of the video, the presenter demonstrates how to replace the battery on a Google Pixel 3 phone. Tools needed include a Screwdriver Set, Suction cup, Plastic pry tools, Tweezers, and Adhesive sticker. The magnetic project mat helps keep track of all screws and parts. The process involves careful disassembly and reassembly, with links provided for tool purchase. Steps include heating the back panel, using a suction cup and plastic mediator to access internal components, disconnecting the battery cable, and removing the adhesive strips holding the battery in place.
00:03:00
In this segment of the video, the speaker demonstrates how to remove the battery from a Google Pixel 3 phone. They advise cutting the black pull tab and pulling out each strip individually using tweezers. It is highlighted that the adhesive strips may tear, and plastic tools can be used to pry up the battery. The speaker provides a link to where viewers can buy a new battery for the phone and recommends using double-sided adhesive tape to reattach the battery to the phone housing.
00:06:00
In this segment of the video, before installing the back cover, it is recommended to check if the phone is functioning properly. Clean off any remaining adhesive using isopropyl alcohol, making sure to remove all residue without damaging the back cover. Use caution with metal tools to avoid harming the coating. Finally, apply new adhesive tape to the back cover before completing the assembly.
00:09:00
In this segment of the video, it is mentioned that if the back cover is unstuck from the phone frame, one can use B7000 glue to reattach it. This method completes the repair process according to HowFixit, and the video concludes with a message to see the viewers next time.