This summary of the video was created by an AI. It might contain some inaccuracies.
00:00:00 – 00:11:09
The video provides a detailed guide on replacing the LCD screen assembly of a OnePlus Note mobile phone. Key steps involve turning off the phone, removing the back cover, disconnecting plugs, and verifying functionality. Tools and specific actions are emphasized throughout the tutorial. Steps include handling the flex cable, using heat to soften the glue, and securing the new screen with B7000 glue. The process continues with placing the new screen, connecting plugs, and securing the secondary PCB cover. Further actions include attaching the battery plug, securing the main board frame, and completing the process with the back cover. The video aims to assist viewers with phone screen replacement and encourages engagement with the channel for more content.
00:00:00
In this segment of the video, the main points are how to replace the LCD screen assembly on the OnePlus Note mobile phone. The key actions include turning off the phone, removing the back cover by heating and using a suction cup, undoing screws to take out the main board frame and secondary PCB cover, disconnecting the battery plug and LCD plug, and verifying the new screen’s functionality before installing it. The importance of using the right tools is highlighted, and specific details like the number of screws to undo and the order of actions are provided.
00:03:00
In this part of the video, the main points are:
1. Disconnect the flex cable and remove the new LCD.
2. Take out the secondary PCB board by undoing screws and disconnecting plugs and antennas.
3. Soften the glue on the LCD using heat, such as a heating pad, heat gun, or hair dryer.
4. Apply gentle pressure to create a gap, insert a plastic tool, and remove the LCD screen.
5. Install the new screen using B7000 glue or double-sided tapes on the frame edges.
00:06:00
In this part of the video, the main steps include placing the new screen into the frame, ensuring the flex cable goes through the opening, adding binding clips or rubber bands to tighten the LCD screen with the frame, placing the secondary board, securing it with screws, connecting four plugs including the LCD and antennas, adding the SIM tray, and finally securing the secondary PCB cover with seven screws.
00:09:00
In this part of the video, the key actions involve connecting the battery plug, securing the main board frame with screws, placing the main back cover using glue or adhesive, and tightening the back cover and LCD with binding clips or rubber bands. The video demonstrates a screen replacement guide for a OnePlus N10 mobile phone. Viewers are encouraged to ask questions, like, share, comment, and subscribe to the channel for more content.