This summary of the video was created by an AI. It might contain some inaccuracies.
00:00:00 – 00:19:41
The video follows the thorough process of cleaning and maintaining an Xbox One S. The presenter begins by addressing the console's noise issue, attributed to dust accumulation, and highlights necessary disassembly steps, including removing various screws (Torx T10 and T8) and specific components like the Wi-Fi card, CPU fan, hard disk drive, and Blu-ray drive. Detailed care is given to avoid damaging delicate parts, and the use of tools like a filler gauge and a hex screwdriver H 3.0 is noted. The key maintenance step involves cleaning the internal components, especially the cooler fan and the application of new thermal paste. Finally, the video covers reassembling the console, ensuring proper alignment, and securing all parts before confirming the system is functional, concluding with a sign-off and a teaser for the next video.
00:00:00
In this part of the video, the presenter explains that their Xbox One S has become noisy and likely needs cleaning due to accumulated dust. They start by removing the security seal on the back of the console. Next, they use a filler gauge to gently detach the black plastic cover from the main white unit, ensuring not to scratch it with the help of a cotton pad. The presenter begins detaching from the sides near the AC power input and carefully works near the sealed area. After successfully removing the plastic cover, they proceed to remove all green screws labeled with “f” using a Torx T10 screwdriver.
00:03:00
In this part of the video, the speaker removes the top cover and identifies three Torx T8 screws related to the Wi-Fi on the front board. They then proceed to remove four additional screws using a Torx T8 screwdriver, taking care to avoid breaking the nearby connector. Following that, the speaker addresses gray screws labeled with the letter “C” using a Torx T10 screwdriver. Finally, they remove the screws for the CPU fan using the Torx T8 screwdriver.
00:06:00
In this part of the video, the presenter takes a look inside an electronic device. They note the presence of dust all around and identify components such as a hard disk drive, Blu-ray drive, and the power supply cable connector. The presenter also points out a plastic component that needs careful handling to avoid breaking and mentions a metal part inside the device.
00:09:00
In this part of the video, the speaker uses a hex screwdriver H 3.0 to remove the x-clamp. They then proceed to unplug the cooler fan and remove it from the radiator. The speaker starts the cleaning process using a soft brush to prevent damage and uses rubbing alcohol to clean off the old thermal paste from both the radiator and the motherboard. Finally, they apply new thermal paste.
00:12:00
In this part of the video, the speaker discusses ensuring proper alignment of the radiator during assembly, matching the gap with the fan plug. They also mention an unnamed middle component and the power supply.
00:15:00
In this part of the video, the speaker discusses matching the hard disk drive with corresponding holes and securing it. They proceed with attaching the cooler fan using black T8 screws, differentiate between T8 and T10 screws, and then reinstall the Wi-Fi card using three black T8 screws. Finally, they mention reinstalling boards using 48 black screws.
00:18:00
In this part of the video, the speaker finishes reassembling the Xbox One S by inserting the remaining T10 screws and matching the plastic cover with the main unit. They conclude by confirming the console is clean and ready for use, and they sign off by thanking viewers and mentioning the next video.