This summary of the video was created by an AI. It might contain some inaccuracies.
00:00:00 – 00:14:29
The video documents an upgrade process for a Lenovo Yoga 720-15IKB laptop. The presenter begins by identifying the necessary tools, such as a T4 screwdriver, and highlights key components like a 70 watt-hour battery and an i7 7700 processor. During the upgrade, they demonstrate how to replace the existing SSD with a 1TB WD Blue SSD, outline the disassembly of the laptop, including battery disconnection, and explore the installed components like the 8GB DDR4 RAM and NVMe drive. A key part of the process involves addressing the thermal paste, which they clean and reapply with Arctic Silver 5 for improved thermal management. The presenter carefully reassembles the laptop, focusing on reattaching the cooler, fans, and covering while providing insights into future possible upgrades like the wireless card. Overall, the video offers a comprehensive guide to upgrading several components of the laptop, stressing proper handling and reassembly for optimal functionality.
00:00:00
In this part of the video, the presenter begins the process of upgrading the SSD in a Lenovo Yoga 720-15IKB. He is uncertain about the existing SSD type but aims to upgrade to a one terabyte model. Initially, he identifies the correct screwdriver needed (a T4) to open the laptop case and notes that the back screws are longer than the front ones. As he opens the case, he mentions that the laptop, manufactured in 2017, has a 2GB graphics model and an i7 7700 processor. Upon opening, he discovers a 70 watt-hour battery, which he intends to disconnect next.
00:03:00
In this part of the video, the presenter demonstrates how to disassemble and upgrade components of a device. They start by opening the case using two fingernails, revealing a 71-hour battery and a stick of 8GB DDR4 RAM. They show how to remove and replace the RAM by pulling tabs and aligning notches. Next, they examine the cooling fans and locate an NVMe drive, which they identify as a drive from 2018 with a 256GB capacity. They note there’s no way to upgrade to a 2.5-inch drive but proceed to add a WD Blue drive. Lastly, the presenter mentions reinstalling Windows 11 on the machine and demonstrates proper insertion of the new drive.
00:06:00
In this part of the video, the host discusses the process of upgrading or replacing the thermal paste in their device. They start by indicating that they’ve already installed a WD Blue SSD. Next, they begin to remove the cooler while ensuring the battery remains disconnected. The removal involves unscrewing various screws and potentially disconnecting the fans. Using tweezers for stubborn parts, the host carefully lifts the cooler. They observe that the existing thermal paste appears to have been replaced previously but was over-applied. The host then proceeds to clean the thermal paste with isopropyl alcohol and a tissue, ensuring both the CPU and GPU are adequately cleaned for a new application.
00:09:00
In this part of the video, the speaker expresses satisfaction with the progress made so far and begins cleaning components. They advise against cleaning over the main board and explain that space is limited on their workbench. The speaker then discusses replacing thermal paste with Arctic Silver 5, ensuring it’s applied properly to both the cooler and the CPU. They proceed to reinstall the cooler and the fans, noting that although the fans are similar models, they have slight differences. The speaker mentions a potential future upgrade of the wireless card before reassembling and securing the components with screws.
00:12:00
In this part of the video, the presenter focuses on reassembling the machine, starting with screwing in the fan screws and reconnecting the battery. They describe which parts of the machine are replaceable, including the battery, single sodium slot, NVMe SSD, fans, thermal paste, wireless card, and charger port. The presenter indicates the bottom cover will be reattached and mentions the specifics about the screws used, particularly noting the three large T4 screws. They conclude by stating they will continue to reassemble the machine, hoping the video has been helpful.