The summary of ‘Upgrade 32GB eMMC HP Notebook with 1TB HDD’

This summary of the video was created by an AI. It might contain some inaccuracies.

00:00:0000:14:36

In the video, the speaker chronicles the complicated process of upgrading a neighbor's low-quality, cloud-based laptop with insufficient internal storage. Initially, the plan seemed straightforward—replacing the soldered 32GB SSD and reinstalling Windows 10. However, numerous complications arose, including a stripped screw and inadequate storage space hindering Windows updates and additional installations. The speaker identified a SATA interface, offering some potential for expansion.

Despite giving clear instructions, the speaker’s neighbor mistakenly swapped the SSD for a regular hard drive, complicating the process. The speaker then resolved the issues by modifying the laptop case with a Dremel tool to fit a hard drive caddy, overcoming physical obstructions like pegs and concealed screws. They emphasized caution and meticulousness throughout the disassembly process.

After securing the hard drive with velcro for easy removal, the speaker configured the BIOS to recognize the new one terabyte hard drive and proceeded with the Windows 10 installation from a USB drive. Although slow, particularly during the "getting files ready for installation" phase, the installation was successful.

The speaker highlighted the significant upgrade in storage, with 918 gigabytes available after the installation. Satisfied with the improvements, they prepared to update the system and return it to the neighbor, concluding with a sense of accomplishment.

00:00:00

In this part of the video, the speaker discusses his plan to replace an SSD in a notebook brought by his neighbor for his daughter. Initially, he assumed it would be a straightforward task of installing the SSD and reinstalling Windows 10. However, he discovered the notebook is essentially a low-quality Chromebook alternative running Windows, which is too heavy for its 32GB soldered SSD. The limited storage makes the notebook almost unusable as it can’t handle Windows updates or additional installations. Further, a stripped screw complicated opening the device. Despite this, he noted a SATA interface within the notebook, indicating potential for adding a new SSD or hard drive. Many people have faced similar challenges with this model due to its poor design and inadequacy in handling Windows 10.

00:03:00

In this part of the video, the speaker criticizes a cloud-based laptop for its limited 32 gigabytes of internal storage, comparing it to a large phone due to its reliance on cloud storage and an SD card slot for expansion. After discussing the laptop’s limitations with their neighbor, the speaker advised the neighbor to buy an adapter to connect a hard drive to the laptop. Despite giving specific instructions through email, the neighbor switched the SSD for a regular hard drive, but the solution still required the same interface, which led to additional complications. The speaker planned to use a Dremel tool to modify the laptop’s case to fit the hard drive caddy, highlighting difficulties encountered with a troublesome screw.

00:06:00

In this part of the video, the speaker shares their success in removing a screw that had previously been difficult, making the task much easier. They proceed to remove the battery and various screws, using a plastic card to aid the process. The speaker explains the need to cut off certain pegs to fit a hard drive into the SATA interface. They then disassemble the optical drive bay, emphasizing the importance of checking for hidden screws underneath stickers and being cautious to avoid unnecessary damage. The segment concludes with the speaker preparing to install the hard drive, noting the obstructions caused by the pegs.

00:09:00

In this part of the video, the creator connects a hard drive to the setup and discusses securing it with velcro instead of double-sided tape for easy future removal. They carefully cut and prepare the surface to mount the velcro pads, ensuring cleanliness and security. After assembling the components, the creator confirms that the laptop recognizes the new one terabyte hard drive. They then navigate the BIOS to adjust the boot order, aiming to install Windows 10 from a USB drive. Uncertainty about the correct USB boot option is expressed, but they proceed by connecting the USB drive and rebooting to check if the installation option appears.

00:12:00

In this part of the video, the speaker discusses their experience installing Windows 10 on a one terabyte hard drive from a USB stick. They mention the process being slow, particularly during the “getting files ready for installation” phase, and express a preference for using an SSD due to its faster performance. Once the installation is complete, they briefly configure settings, noting that they personally disable certain features. They check the storage space, noting an available 918 gigabytes, and are pleased that the other hard drive does not appear. The speaker concludes by expressing satisfaction with the process, indicating the intent to update the system and return it to its owner, and signs off with a farewell message.

Scroll to Top