This summary of the video was created by an AI. It might contain some inaccuracies.
00:00:00 – 00:14:25
The video outlines the comprehensive setup, operation, and maintenance of a robotic lawn mower, including key steps and best practices. Initially, it covers unpacking the mower and assembling necessary components, like the charging station in an optimal location with a good Wi-Fi signal. Users are guided through connecting the mower to the Dreamy Home app via Bluetooth and Wi-Fi, managing the battery, and preparing the mower for operation.
Mapping the lawn is a significant focus, where users create operational boundaries, no-go zones, work zones, and paths using the app. Clear guidelines ensure proper setup, including safe distance measures, turn angles, and starting and ending positions. Users are also instructed on controlling the mower remotely and setting preferences through the app or control panel.
Maintenance and cleaning protocols are detailed to ensure the mower’s longevity, such as regular checks, proper blade rotation, and seasonal storage tips. Recommendations include creating new maps if the garden layout changes and regularly replacing mower blades to maintain cutting efficiency.
00:00:00
In this segment of the video, the steps for setting up a robotic lawn mower are explained. The process begins with unpacking the mower and its accessories, ensuring everything is present. The mower is placed on a soft surface, turned over, and its blade disc cover removed. The charging station is then installed in a flat, open area with a good Wi-Fi signal. The base plate is secured with screws, and the charging tower is clicked into place. The power supply is connected and placed above ground, verifying the LED indicators on the charging station. The mower is then charged, and its control panel accessed by pressing the power button, selecting the language, and setting a PIN code. Finally, the Dreamy Home app is installed on a phone for managing the mower.
00:03:00
In this part of the video, the process of connecting the A1 mower to your phone via Bluetooth and Wi-Fi is demonstrated. First, you enable Bluetooth on your phone, open the Dreamy Home app, and scan the QR code inside the cover of the A1 mower to connect. Then, by pressing and holding the knob on the A1 for 3 seconds, you enter Bluetooth pairing mode, start pairing, and confirm the PIN code in the app.
Once Bluetooth is successfully connected, Wi-Fi setup follows by ensuring both devices are on the same network, selecting the Wi-Fi network, and entering the password to connect.
Next, the video guides you on battery maintenance: switching off the mower, opening the battery compartment with a screwdriver, disconnecting the battery, connecting the link module, organizing cables, and reinstalling the battery.
Before mapping, ensure the battery level is over 50%, the mower is Bluetooth-connected, boundaries aren’t set on steep slopes, ramps are placed on high-difference paths, boundaries aren’t in narrow areas, and the mower docks correctly. Finally, you start creating the boundary using the Dreamy Home app.
00:06:00
In this part of the video, the presenter explains how to use remote control to guide a mower along the edge of the lawn, creating an operational boundary visible on an app. Important guidelines include staying within 5 meters behind the mower, maintaining a 10 cm distance if there is a height difference, and ensuring turns have an angle greater than 90 degrees. To finalize the boundary, the mower needs to return close to the starting point before tapping “close boundary” in the app.
Additionally, the segment covers setting up “no-go zones” for areas like pools or flower beds by marking their boundaries with the mower and confirming the settings on the app. For divided lawns or isolated areas, “work zones” need to be established similarly. If paths between isolated zones are necessary, the mower is used to map a cross-over route, ensuring seamless operation between different lawn sections.
00:09:00
In this segment, the steps for setting up and operating a robotic lawn mower are described, including creating work areas, no-go zones, and paths using the app. The mower should start 1 meter away from the boundary and finish within 0.2 meters of the charging station. Once mapping is complete, the mower performs a self-check. Users are reminded to set mowing preferences in the app and can start, pause, resume, or end mowing tasks via the app or the mower’s control panel using a pin code. Regular maintenance is recommended to ensure optimal performance and longevity.
00:12:00
In this segment of the video, viewers are guided through the maintenance and cleaning process for the A1 mower. The instructions include powering off and unplugging the charging station, using a soft water hose to clean key parts such as the wheels, blade disc, and back cover. A cleaning brush is used, and the lighter sensor is wiped with a soft cloth. Display button panels and charging contacts are also cleaned. The blade disc and blades are checked to ensure they rotate properly.
For winter storage, the mower’s battery should be fully charged, then the mower and charging station should be powered off, unplugged, and stored appropriately. Recommendations for creating a new map if the garden changes, and replacing the mower’s blades regularly to keep them sharp, are also provided. Instructions for blade replacement are detailed, including how to align and install new blades.