This summary of the video was created by an AI. It might contain some inaccuracies.
00:00:00 – 00:47:44
The video serves as a comprehensive beginner’s guide to the RODE Wireless GO II, outlining its compact wireless audio system features. It highlights ease of use, dual transmitter capability, device compatibility, and the importance of backup recording. Key components include the receiver and transmitters, each featuring versatile accessories like lavalier mics and improved windscreens. The video covers practical usage scenarios, optimal placement to prevent signal blockage, and device setup including turning systems on and off and proper connectivity with recording devices. Important functions such as split versus merged recording modes, muting, gain control, and battery management are discussed in detail to ensure quality recordings and prevent signal loss.
Advanced features highlighted through the RODE Central software include configuring settings like backlit displays, gain modes, and backup recording preferences. Detailed workflows, especially for managing audio levels and ensuring constant backups, cater to both solo creators and those using multiple transmitters. Recommendations for specific recording setups, such as using low sensitivity for high-volume environments and keeping backup recording on, are emphasized to maintain optimal performance and audio quality. Throughout, best practices such as ensuring proper setup, charging devices, and managing recordings are stressed to maximize the utility of the RODE Wireless GO II system.
00:00:00
In this segment, the video serves as a beginner’s guide to the RODE Wireless GO II, highlighting its compact wireless audio transmission system features. The speaker outlines the video’s structure: an overview of the units, setup instructions, RODE Central software, and backup recording workflows. Key benefits emphasized include ease of use, dual transmitter capability, device compatibility, and backup recording to prevent audio loss. The segment details box contents like the receiver, transmitters, fuzzy windscreens, cables, and carrying pouch. The speaker also explains the buttons and functionalities of the receiver and transmitter, including their simple design and practical features like the clip that doubles as a cold shoe mount.
00:05:00
In this part of the video, the presenter explains the various functionalities of the RODE Wireless GO II microphone system. They describe the placement and purpose of the TRS connection, which allows users to connect a lavalier mic that overrides the built-in microphone on the transmitter. The video highlights the versatility of the RODE Wireless GO II’s attachments, including the optional lavalier and headset mics, and mentions the convenience of the integrated clip for mounting.
The presenter also discusses the included windscreens, noting their improved attachment mechanism in the second version that securely locks them in place with a half turn. This enhancement prevents them from easily falling off as they did in the original version. They clarify when to use the windscreens, suggesting it’s mostly necessary in outdoor or windy conditions.
Additionally, the segment covers the digital 2.4 GHz transmission system of the RODE Wireless GO II, which provides a range of up to 200 meters and is less prone to interference compared to RF systems, although it still requires maintaining a line of sight for optimal performance. The presenter emphasizes the importance of backup recording in case the signal is lost due to obstructions.
00:10:00
In this part of the video, the speaker provides guidance on the placement of the transmitter to ensure optimal signal reception, noting that placing it on your back may cause signal blockage especially during exercises. It is recommended to place the transmitter on your hip, front pocket, or slightly behind on the back of your pant line for better signal retention. The Wireless GO II system comes pre-paired out of the box, ensuring consistent connectivity each time it is powered on. The speaker also explains how to turn the devices on and off, and how to use the channels to connect or disconnect the transmitter from the receiver. Additionally, the video covers connection types for recording devices, such as using the 3.5 TRS connection for cameras and USB-C for computers and phones, emphasizing the importance of using the audio input for proper signal reception.
00:15:00
In this segment, the video covers several aspects of using the RODE Wireless GO II for various applications such as Zoom meetings. Key points include the device’s battery life, which lasts about seven hours, and its capability to charge via USB-C cable while in use. The video also explains that continuous use requires either a backup battery for the receiver or swapping out the transmitter, as there’s no swappable battery feature.
The segment also describes the display on the receiver, illustrating how to read audio levels, battery indicators, and receiver strength for transmitters. Additionally, settings like gain control and power-saving mode are detailed, including how they are adjusted and their effects on recording volume. Finally, visual indicators for battery status on both the transmitter and receiver are outlined, ensuring the user understands when recharging is necessary.
00:20:00
In this part of the video, the speaker discusses the differences between split and merged recording modes on the RODE Wireless GO II and the rationale for using each. In split recording mode, one channel records from transmitter one and the other from transmitter two. This allows users to edit each track independently in post-production. The merged mode records the same audio on both left and right channels, which is ideal for solo creators using one transmitter. The speaker explains how to switch between modes and the implications of each setup, including the use of a safety channel in merged mode to handle fluctuating audio levels. Recommendations are given based on different recording scenarios, emphasizing the flexibility and control offered by split recording for dual transmitter setups and the simplicity of merged mode for single transmitter use.
00:25:00
In this part of the video, the focus is on how to mute the transmitter of the Wireless GO system and adjust the gain control for optimal audio recording. The muting feature allows users to stop the transmitter from sending signals to the receiver without turning off the device, useful when the audio is not needed momentarily. Users can mute the transmitter either via the transmitter itself or through the receiver, with visual indicators on the receiver showing the mute status.
Additionally, the video delves into gain control settings on the receiver. Basic mode provides three gain settings: zero, negative 12, and negative 24, which affect the audio signal sent to the camera. To achieve better audio quality, the advanced mode offers ten steps of gain control, ranging from zero to negative 30. The video advises keeping the camera’s recording level as low as possible and boosting the gain on the Wireless GO II to reduce background noise. It also emphasizes using manual audio settings on the camera to maintain a consistent audio level, ideally recording between negative 12 and zero, and performing tests to ensure proper audio levels.
00:30:00
In this segment of the video, the speaker provides a step-by-step guide for optimizing audio settings when using a camera with the RODE Wireless GO II. Key actions include setting the camera to the lowest audio setting, adjusting the transmitter gain, and performing an audio test. Important details include the target audio levels (negative six to negative twelve), the need to adjust for varying vocal volumes, and specific setups depending on the microphone type (lavalier or headset). The speaker also explains using low sensitivity mode for high-volume situations and how to access it. Finally, the speaker introduces the RODE Central software for further device configuration and updates, emphasizing proper connection setup.
00:35:00
In this part of the video, the speaker explains how to use RODE Central with the RODE Wireless GO system. They demonstrate plugging in the receiver and transmitter simultaneously, which appear in the top left-hand corner of the software labeled as RX (receiver) and TX (transmitter). Settings such as backlit display, gain mode (switching between three-step and ten-step increments), split and merged modes, and the safety channel are covered. The safety channel is only available in merged mode, indicated by a blue light when turned on. The functionality of the receiver’s power button can be changed from controlling display settings to setting markers in backup recordings. The receiver settings also show battery level, clock (which syncs with the computer’s time), firmware version, and hardware ID. For the transmitter, settings include backup recording options (always, backup, or off), which dictate when the backup recording starts.
00:40:00
In this segment, the video covers various functionalities of the RODE Wireless GO II system. It explains how to manipulate the pad feature, adjust LED brightness, and configure the power button on the transmitter, offering options for mute, marker, or none to avoid accidental muting. It details the recording modes: ‘always’ for uncompressed broadcast quality (seven hours) and ‘backup’ mode for either compressed standard quality (40 hours) or broadcast quality (seven hours). It shows how to manage and listen to backup recordings, highlighting the need to export them individually due to the system’s limitations. Additionally, it mentions that markers are automatically set during signal dropouts to aid in identifying issues. The segment also emphasizes the importance of keeping backup recording on to ensure salvaging audio in case of disruptions. The workflow suggests turning off the receiver between takes to stop the backup recording and managing recording times efficiently by leveraging the seven-hour capacity.
00:45:00
In this segment, the creator discusses various settings and workflows for using a wireless audio transmitter and receiver system. Key points include toggling the receiver to cut backup recording, using ‘always mode’ for solo filming to ensure constant backup, and choosing ‘merged’ or ‘split modes’ depending on how many transmitters are in use. The creator also highlights the importance of using RODE Central software to export and manage backup recordings, noting some frustrations like the inability to download multiple recordings at once and the need to activate backup by toggling the transmitter or receiver. Essential reminders include erasing the transmitter before new shoots, ensuring devices are charged, and confirming settings on RODE Central.