The summary of ‘How to Replace the spark plugs on the Jeep Cherokee 2014 to 2019’

This summary of the video was created by an AI. It might contain some inaccuracies.

00:00:0000:05:58

The video provides a detailed guide on replacing spark plugs in a vehicle, emphasizing safety and precision. Key steps include inspecting and gapping new spark plugs, safely raising the hood, and disconnecting the battery. Critical components such as the intake air temperature sensor, ignition coils, and intake air hose must be removed to access the spark plugs. The use of compressed air to clear debris and a short rubber hose for installing spark plugs to avoid cross-threading is recommended. The spark plugs should be hand-tightened, torqued to the correct setting, and treated with anti-seize and dielectric compounds. The reassembly involves reattaching the ignition coils, electrical connectors, intake air tube, air filter housing, and throttle body. The process concludes with securing the engine cover and reconnecting the battery.

00:00:00

In this part of the video, the process for replacing spark plugs is explained. Firstly, it is recommended to inspect the new spark plugs for defects and adjust the gap if necessary using a wire-type gauge. Next, open the driver’s side door, pull the hood release lever, and raise the hood. Remove the engine cover by lifting it off the ball studs. Disconnect the negative terminal of the battery to ensure safety. Then, disconnect various electrical connectors, including the intake air temperature sensor and the ignition coils. Loosen and remove components such as the intake air hose and ignition coils to access the spark plugs. Finally, it is advised to use compressed air to clear any debris from the spark plug holes before removing the spark plugs with a socket.

00:03:00

In this part of the video, the speaker details the process of removing, applying anti-seize compound, and installing spark plugs. The use of a short rubber hose is recommended to avoid cross-threading, which can prevent costly damage. The spark plugs should be hand-tightened and then torqued to the specified setting. Dielectric compound is advised for the coil boots before installing the ignition coils and connecting electrical connectors. The intake air tube, air filter housing, and throttle body should be reassembled and secured, with zip ties used if the coolant hose retainer breaks. The process concludes with reconnecting the battery, aligning, and securing the engine cover, and finally closing the hood.

Scroll to Top