This summary of the video was created by an AI. It might contain some inaccuracies.
00:00:00 – 00:22:53
The video focuses on the process of replacing an old thermostat with the ecobee3 light thermostat, emphasizing safety and proper installation techniques. Key points include turning off power, understanding wire colors, using a C wire for smart thermostats, and ensuring a secure mounting. The installation steps involve preparing wiring, connecting wires correctly, and powering up the thermostat. Attention is given to wire connections in the air handler, especially the C wire, along with powering the thermostat without a C wire. Overall, the video provides a detailed guide for viewers to successfully install a smart thermostat at home.
00:00:00
In this segment of the video, the speaker discusses the process of replacing an old thermostat with a new one, specifically the ecobee3 light thermostat. They provide links for different smart thermostats and emphasize the importance of understanding wire colors. The speaker walks through the steps of installing the thermostat, advising viewers to watch out for potential issues. They remind viewers to take safety precautions when dealing with electrical components and suggest contacting a professional if unsure. The speaker assures viewers that the installation process is doable at home and offers timestamps for easy navigation through the video.
00:03:00
In this segment of the video, the presenter emphasizes the importance of turning off the power before working on the thermostat. They demonstrate how to remove the cover of the thermostat, noting that most thermostats are held in place by clips. The video explains the significance of taking a picture of the wiring for reference. It mentions the need for a C wire when installing a smart thermostat for powering its features. The segment concludes with instructions on removing the wires and backing plate from the old thermostat.
00:06:00
In this part of the video, the focus is on checking the size of the opening in the single gang box to ensure the backing plate can cover it. If the opening is too large, a cover plate may be needed, which can be purchased if not included with the thermostat. Additionally, the video discusses checking and preparing the wiring, including identifying and using a common wire like the blue wire if needed. The steps also highlight stripping and preparing the wires before mounting the backing plate, using a level for proper alignment, marking hole points, and preparing for installation.
00:09:00
In this segment of the video, the speaker shows how to mount a smart thermostat using a bubble level and drywall anchors. They recommend using drywall anchors that can hold up to 50 pounds for security. The speaker demonstrates marking, screwing the anchors into the wall, adjusting the mounting plate position, and securing it with screws. They emphasize ensuring the thermostat is securely mounted before leveling it and pulling the wires through the hole for further installation.
00:12:00
In this segment of the video, the main points are:
– Installation of a backing plate and tightening screws.
– Connecting wires to the thermostat, using push tabs for terminals.
– Ensuring correct wire connections: red wire to Rc terminal, G for fan, yellow for compressor, C terminal, and white for heater.
– Trimming excess wire length for a neat installation.
00:15:00
In this segment of the video, the focus is on ensuring all wires are connected properly before installing a thermostat. The speaker emphasizes the importance of checking and connecting the C wire in the air handler for the thermostat to receive power. They show how to locate, identify, and connect wires in the air handler, specifically highlighting finding the common blue wire, stripping it for a clean connection, and connecting it to the yellow wire or the compressor wire for power. A step-by-step approach is demonstrated to avoid confusion and ensure a successful connection for the thermostat.
00:18:00
In this segment of the video, the speaker explains how to connect the C wire for a thermostat installation. They identify the yellow wire that connects to the compressor outside, ensuring proper connections with the blue common cable. The process involves tracing the wire, connecting the common wires, and making sure the connections are secure. After connecting the blue wire, they confirm the completion of the task and proceed to put the panel back on. The overall steps include tracing and connecting wires, ensuring proper connections both inside and outside, and finally, mounting the thermostat onto the pins for a complete installation.
00:21:00
In this part of the video, the speaker explains how to power up a thermostat after turning on the breakers. They mention that it will take some time for the thermostat to fully boot up and suggest setting it up with an app and pairing it with Wi-Fi as explained in the manual. The focus is on installing a thermostat without a C wire by connecting it from the thermostat box to the air handler. The video offers a solution to this issue and encourages viewers to like, subscribe, and follow for future content.