The summary of ‘NZXT Kraken 240 RGB Setup and wiring guide’

This summary of the video was created by an AI. It might contain some inaccuracies.

00:00:0000:15:36

The video provides a detailed guide on setting up the NZXT Kraken 240mm RGB all-in-one cooler in an NZXT H6 Flow RGB case, specifically targeting an Intel LGA 1700 socket for a 14th-gen CPU but also applicable to 12th and 13th-gen Intel setups. Key steps include installing the cooler with pre-applied thermal paste, securing the radiator for optimal performance, and managing cables effectively. The NZXT CAM software is necessary for configuring RGB lighting, monitoring, and adjusting system performance, utilizing features like dual infographics for CPU and GPU temperatures. Proper installation of the Z790 motherboard and ensuring efficient airflow and cable management are emphasized. The video concludes by encouraging viewer interaction and engagement with the channel.

00:00:00

In this part of the video, the host demonstrates how to set up and wire the NZXT Kraken 240mm RGB all-in-one cooler. The video covers installation into the NZXT H6 Flow RGB case, targeting an Intel LGA 1700 socket on a 14th gen CPU, but applicable to 12th and 13th gen Intel setups as well. Important details include the pre-applied thermal paste on the pump head, the built-in display on the cooler, and the requirement for NZXT’s CAM software. The host advises on the best placement of the radiator for optimal performance and aesthetics, suggesting top mounting with cables hidden towards the case’s rear. The video also explains the use of long screws to secure the fans to the radiator and the importance of the fan direction for proper airflow. Additionally, it mentions the included RGB controller, which needs USB and SATA power connections, for the RGB lighting on the fans.

00:03:00

In this part of the video, the focus is on setting up the RGB lighting and connecting the necessary cables for a cooling system. It explains that each fan has an RGB connector and a separate power connector that need to be connected to a controller. Attention is given to the large connector on the pump head that needs to be securely clipped in place, which has multiple cables for fan power and USB connections. A three-part cable provides fan power, and a spare connector is mentioned but not to be worried about. A USB cable from the pump head and SATA power for the power supply must also be connected. The smallest cable connects to the motherboard’s AIIO pump header or CPU fan header to avoid error warnings.

Additionally, it discusses using a y-splitter cable from NZXT to merge two USB connections into one, freeing up a port on the motherboard for other uses. The importance of proper preparation and clear understanding of where to plug in each cable is emphasized for a smooth build process.

00:06:00

In this part of the video, the focus is on preparing and installing a 14th-gen Z790 motherboard with an LGA socket 1700. The presenter explains the importance of configuring the backplate and standoffs before mounting the motherboard inside an H6 Flow RGB case. They note that the process may differ slightly depending on the CPU and motherboard model, but instructions are provided in the box. The presenter also discusses the subsequent steps, such as mounting the radiator using small screws and washers, ensuring proper cable management, and optimizing airflow by positioning the radiator to exhaust air out of the case’s top. Additionally, the video mentions the significance of running benchmarks to verify optimal CPU performance and concludes with installing the pump head with pre-applied thermal paste over the CPU.

00:09:00

In this part of the video, the speaker explains the process of securing a cooler over a CPU using thumb screws, emphasizing the importance of tightening them properly without overtightening to avoid motherboard damage. Following this, they discuss plugging in various cables, including the AIO pump header, fan power cables, SATA connections, and USB connections necessary for RGB lighting control via NZXT’s CAM software. The speaker highlights the need to manage cable placement thoughtfully to maintain organization and avoid obstructions. The segment concludes with verification that the system is functioning correctly, ensuring that fans and pumps are operating properly and displaying default temperature readings, which can be adjusted further using the software.

00:12:00

In this part of the video, the presenter discusses the setup and features of a cooler with a display that can show both CPU and GPU temperatures simultaneously, which helps in monitoring system performance. The presenter explains how to use NZXT’s CAM software to configure various settings such as system performance overview, fan lighting effects, and display customization options. The software allows users to adjust the display to show dual infographics for both temperatures or load percentages with customizable colors. Additionally, users can add GIFs, although they are limited to a small square in the middle of the display for non-elite versions. Other display options include carousels, clock faces, and web integrations.

00:15:00

In this part of the video, the speaker encourages viewers to subscribe to the channel, watch more videos linked in the description, and leave a comment if they have questions. The speaker also suggests that viewers consider joining the channel to enjoy additional benefits and wishes them a great life.

Scroll to Top