This summary of the video was created by an AI. It might contain some inaccuracies.
00:00:00 – 00:05:24
The video provides detailed instructions on how to apply a dbrand skin to a Pixel 6 or Pixel 6 Pro device. The process begins with preparing the device by cleaning it thoroughly and ensuring proper lighting. The dbrand skin package includes components for the back, back accent, camera, and logo, and the application requires a hairdryer for proper adherence. The tutorial emphasizes starting with the camera skin, followed by carefully aligning and attaching the back skin flush against the camera housing, making adjustments as necessary. Heating and applying pressure is crucial for wrapping the skin around the phone's curved edges smoothly, with a microfiber cloth used to soften sharp edges. For the logo skin, multiple sizes are provided to ensure a precise fit, and the correct size should be selected and applied with care.
00:00:00
In this part of the video, the focus is on applying a dbrand skin to a Pixel 6 or Pixel 6 Pro device. It starts with preparing the device by wiping it free of dust and fingerprints and ensuring you are in a well-lit area. The dbrand skin package includes up to four elements: back, back accent, camera, and logo, along with a microfiber cloth. A hairdryer is necessary for the installation.
The process begins with applying the camera skin. Then, for the back skin, after removing it from the 3M paper and reattaching as shown, it must be aligned flush against the camera housing. The skin is then checked for even spacing on both sides; if it’s not centered, slight horizontal adjustments are made. Once aligned, pressure is applied to the exposed portion, the 3M paper is fully removed, and the back surface is smoothed out. To conform the skin around the phone’s curved borders, the material is heated with a hairdryer and firm pressure is applied to wrap the skin around the edges. This process is repeated for all sides and corners. The segment concludes with the next step involving the back accent.
00:03:00
In this part of the video, the instructions guide you through the process of applying a skin to your device. You start by removing the skin from the 3M paper and aligning it flush against the camera housing. It’s crucial to ensure the skin is evenly spaced on both sides. Use a hair dryer to heat the border and apply pressure to wrap the skin around all sides and corners. Smooth any sharp edges with a microfiber cloth, rubbing each edge 10 to 15 times to soften them. If bumps or wrinkles remain, heat the affected area and smooth it out with the cloth. For those applying a logo skin, three different sizes are provided to ensure a perfect fit; if the first size is too large, try the others. Peel the logo skin, reattach it to the 3M paper, and then press it into place on your device.